Vagrant (for Mac and Windows)

In order to set up the JEDI environment with Singularity or Charliecloud , you’ll need to first set up a Linux operating system. We will often focus on Ubuntu for illustration purposes but if you prefer other varieties of Linux, these are also available from the VIrtualbox provider that we describe below.

So, if you’re using a Mac or Windows computer, you will want to set up a local, self-contained Linux environment within your broader operating system. This is commonly called a virtual machine (VM). Once you have a linux VM up and running, you will be able to install Singularity or Charliecloud and triumphantly enter the corresponding JEDI Container.

This can all be achieved using an application called Vagrant, which is developed and distributed by a company called Hashicorp. Though we will sometimes refer to Vagrant as the virtual machine provider, the actual Linux operating system is ultimately provided by Oracle’s VirtualBox software package. Vagrant is essentially a tool will allow you to build, configure, and manage a VirtualBox operating system. In particular, we will use Vagrant and VirtualBox to create an Ubuntu virtual machine on your Mac workstation or laptop. We’ll then populate that Linux VM with specific JEDI software tools (compilers, ecbuild, etc.) using Singularity or Charliecloud.

From this brief introduction, it is clear that you do not need to worry about Vagrant or VirtualBox if your working machine (whether it is a workstation, laptop, or HPC system) is already running Linux and/or is already running Singularity. By working machine we mean whatever machine you plan to compile and run JEDI on.

You do need Vagrant and VirtualBox (or something equivalent) if you wish to run JEDI from a Mac or Windows machine. Though you can use Vagrant for both platforms, we focus here on Mac OS X.

We refer Windows users to the Vagrant download page where you can download a binary implementation for windows and install it using the Windows package manager. After installing Vagrant, you may wish to return to this document for tips on how to configure it for JEDI (skipping Step A of the next section).

Installing and Configuring Vagrant

A: Install Vagrant and VirtualBox

As with Windows, you can install Vagrant on a Mac by downloading a pre-compiled binary package from the Vagrant Dowload Page. However, we recommend that you install with Homebrew as described below to give you more flexibility in managing both vagrant and virtualbox.

Before you begin you should install or update Homebrew. You’ll need a relatively recent version in order to use the cask extension. Once you have done this, you can proceed as follows:

brew cask install virtualbox
brew cask install vagrant
brew cask install vagrant-manager

B: Download JEDI Configuration File

Now we need to tell Vagrant what type of virtual machine we want to create and how to provision it with the software we need. This is done by means of a configuration file that goes by the default name of Vagrantfile.

So, to proceed, you should first create a directory where you will place your Vagrantfile. This is where you will launch your virtual machine. You should also create a subdirectory called vagrant_data that we will use. If you don’t create this directory, you will get an error when vagrant tried to mount it.

You can call the parent directory whatever you wish but if you change the name of the vagrant_data directory then you will also have to change the Vagrantfile.

mkdir $HOME/jedi-vm
cd $HOME/jedi-vm
mkdir vagrant_data

In what follows, we will refer to this as the home directory of your Vagrant Virtual Machine (VM).

We at JCSDA provide a Vagrantfile that can be used to create a virtual machine that is pre-configured to build and run JEDI, with both Singularity and Charliecloud pre-installed.

Or, alternatively, you can retrieve it with

wget http://data.jcsda.org/containers/Vagrantfile

Place this Vagrantfile in the home directory of your Vagrant VM.

Warning

If you already have a Vagrant VM installed and you want to install a new one (particularly using a Vagrantfile in the same directory as before), then you may have to fully delete the previous VM first to avoid any conflicts. Instructions on how to do this are provided in the Deleting a Vagrant VM section below.

Note

If you have problems with this JEDI Vagrantfile, there an alternative Vagrantfile that you can download that expands the disk storage using the disksize plugin to Vagrant. This also comes with Charliecloud and Singularity pre-installed. After downloading this file, it’s easiest to change its name to Vagrantfile and then run vagrant up again. However, before trying this make sure that you either destroy your previous VM or create the new VM from a different directory and give it a different name (edit the Vagrantfile and search for jedibox).

C: Launch your Virtual Machine

Now you are ready to create your virtual machine by running this command:

vagrant up

The first time you run this command, it will take several minutes. Vagrant is installing Singularity, Charliecloud, and a few other supporting software packages. Once created, these will be part of your virtual machine and they do not need to be re-installed (unless you explicitly tell vagrant to do so).

So, when this command finishes, you can log into your virtual machine with

vagrant ssh

Now you are in a linux environment (CentoOS 7). From here you can pull the JEDI container of your choice,

The choice is up to you. Both the Singularity container and the Charliecloud container are built from the same Docker image file so they contain identical software. The main advantage to using Charliecloud is that you do not need root privileges to run it. But, if you use Vagrant this should not be a problem because you should have root privileges in your Vagrant VM. You can even try both in the same virtual machine and see which one you prefer.

Depending on which Vagrantfile you use, your VM may run either the Ubuntu or the CentOS operating system. However, you shouldn’t need to be too concerned about this because you’ll be working mostly in either the Singularity container or the Charliecloud container which both run Ubuntu. So, if you work within the container, you will be in an Ubuntu environment regardless of which OS your vagrant VM is running.

D: Exit Container and Vagrant

Normally you will be spending your time working in either the Singularity container or the Charliecloud container. When you’re finished working for the day, it’s important to remember to enter exit twice, once to exit the container and once to log out of the Vagrant virtual machine:

exit # to exit Singularity or Charliecloud
exit # to exit Vagrant

Now, to temporarily shut down your virtual machine, enter

vagrant halt

Note that this is very different than the vagrant destroy command, which should be used with caution. As the name of the command suggests, vagrant destroy will completely destroy the virtual machine along with all the files and data it contains. So, if you do this, you will have to re-create the virtual machine and re-install any JEDI bundles that you are working with. And, you will lose any files that you have been editing. By contrast, vagrant halt will merely shut down the virtual machine, retaining all your files. This will allow you to gracefully log out of your workstation or laptop without harming your JEDI environment. For further details see the Vagrant command reference.

E: Enable X Forwarding (Optional)

If you’d like to use graphical tools such as kdbg or emacs from within the Singularity or Charliecloud container, you will need to set up X forwarding. If you’re doing this on a Mac, you will first need to install XQuartz, if it’s not already installed.

After XQuartz is up and running, you can create and enter your VM as described in step C above. Next you will have to set your DISPLAY environment variable to use your local machine. This is best done from within the container (either Singularity or Charliecloud) because environment variables set outside the container may not be accessible from within.

# inside the container
export DISPLAY=10.0.2.2:0.0

You may wish to add the appropriate display definition to an initialization script that you can run every time you enter the singularity container as described here. Then, enter this on your host machine (i.e. your Mac or Windows machine), to grant the VM permission to display

#On your Mac
xhost + 127.0.0.1

These are the addresses that Vagrant uses for by default. You may wish to add the appropriate display definition to an initialization script that you can run every time you enter the singularity container as described here.

To test the display, you can start a graphical application. For example:

# inside the container
emacs &

Troubleshooting Tips

If the above procedure did not work, there are several things to try.

First, if you have a Mac, make sure XQuartz is installed. You may need to re-boot your VM for a new installation to take effect.

Next, try running emacs from outside the container to see if the problem is with Vagrant or with the container.

If you used a different Vagrant box than the one specified in the JEDI Vagrantfile (for example, if you used one from Singularityware), if might help to set your DISPLAY variable in the container to this instead:

export DISPLAY=localhost:10.0

If the display still does not work, then you may need to explicitly grant Vagrant access to your display through xauth as we now describe.

Exit the container and exit vagrant. Then edit your Vagrantfile and add these two lines (at the bottom, just before the end in the main Vagrant.configure("2") do |config| loop will do)

config.ssh.forward_agent = true
config.ssh.forward_x11 = true

Then recreate your vagrant VM, log in, and enter the container (for example, for Singularity):

vagrant halt # restart vagrant
vagrant up
vagrant ssh
singularity shell --bind ./vagrant_data -e <singularity-image-file>

Now create an .Xauthority file and generate an authorization key for your display:

touch ~/.Xauthority
xauth generate 10.0.2.2:0.0 . trusted

You can list your new authorization key as follows:

xauth list

There should be at least one entry, corresponding to the display you entered in the xauth generate command above (you can ignore other entries, if present). For example, it should look something like this:

10.0.2.2:0  MIT-MAGIC-COOKIE-1  <hex-key>

where <hex-key> is a hexadecimal key with about 30-40 digits. Now, copy this information and paste it onto the end of the xauth add command as follows:

xauth add 10.0.2.2:0  MIT-MAGIC-COOKIE-1  <hex-key>

If all worked as planned, this should grant permission for vagrant to use your display.

Customizing the Vagrantfile (optional)

The JEDI Vagrantfile you downloaded in Step B above is already provisioned with everything you need to run JEDI, by means of the Singularity or Charliecloud software containers.

However, it’s useful to point out a few configuration options that some users may wish to customize.

Creating your own Vagrantfile

First comes the choice of machine. The JEDI Vagrantfile uses a CentOS 7 operating system but there are a number of other options available, particularly with the well-maintained bento boxes provided by Vagrant. You may wish to maintain multiple virtual machines with different Linux operating systems.

For example, you can create your own Vagrantfile by entering something like this:

vagrant init bento/ubuntu-18.04

When you then run vagrant up, this will create an Ubuntu 18.04 operating system. You can then install either Singularity or Charliecloud manually.

The makers of Singularity also provide their own Vagrant box, with Singularity pre-installed:

vagrant init singularityware/singularity-2.4

However, as of Dec, 2018, the most recent version of Singularity available is 2.4; there have been considerable changes since then with the release of Singularity 3.0. Using the JEDI Vagrantfile will ensure that your version of Singularity is compatible with the version used to create the JEDI Singularity image.

Allocating Resources for your Virtual Machine

The JEDI Vagrantfile comes pre-configured to allocate 16GB of memory and 18 virtual CPUS to the VM. This is the minimum resource allocation to run many tests and applications. Furthermore, if you create your own Vagrantfile, the default resource allocation will likely be insufficient to run JEDI.

You can change these resource allocations by editing the Vagrantfile. Look for the following section that specifies the provider-specific configuration (variable names may differ). Change the vb.memory (in MB) and vb.cpus fields as shown here:

config.vm.provider "virtualbox" do |vb|

  # [...]

  # Customize the amount of memory on the VM:
  vb.memory = "16384"

  # Customize the number of cores in the VM:
  vb.cpus = "18"

  # [...]

end

File transfer between your Mac and the VM

In Step B above we created a directory called vagrant_data. The JEDI Vagrantfile is configured to use this directory to transfer files between your host machine (which may be running Mac OS or Windows) and your VM. Within the VM, this directory is mounted as $HOME/vagrant_data.

To change this, you can edit the Vagrantfile and find the section for a synced folder:

# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
c.vm.synced_folder "vagrant_data", "/home/vagrant/vagrant_data"

The first argument specifies the directory on the host machine, relative to the home directory of your Vagrant VM (i.e. the directory where the Vagrantfile is). The second specifies the path of the directory on the VM. You can change these paths and/or names if you wish but make sure the host directory exists before running vagrant up so it can be properly mounted.

It might also be necessary to create the mount point from within the vagrant VM:

mkdir ~/vagrant_data # from within the VM, if necessary

And, here is another tip: Use an absolute path for your guest directory. Vagrant will complain if you use a relative path, such as ./vagrant_data. You will need root permission if you want to branch off of root (for example /vagrant_data is the default mounting if you run vagrant init.)

On a related note: your default user name when you enter Vagrant will be vagrant and your home directory will be /home/vagrant. If you want to change this you can do so by adding a line like this to your Vagrantfile:

config.ssh.username = 'vagabond'

For more information, and more options, see the Vagrant documentation.

Working with Vagrant and the JEDI Container

Once you have Vagrant and a container provider (either Singularity or Charliecloud) all set up as discussed above, your daily workflow may be as follows. You might start by going to the directory where you put your Vagrantfile. Then fire up and log in to your virtual machine.

cd $HOME/jedi-vm
vagrant up
vagrant ssh

From there you can enter the container and (optionally) run your startup script. For example, in the case of Singularity this would look something like this:

singularity shell -e <singularity-image-file>
source startup.sh

The equivalent commands for Charliecloud would be:

ch-run -c /home/vagrant ch-jedi-latest -- bash
source startup.sh

Now you’re in the JEDI container and you can do whatever you wish: edit files, build, compile and run JEDI, etc. If you want to use X-forwarding you’ll have to explicitly tell your Mac to accept graphical input from the Vagrant VM as described in Step G above:

#On your Mac
xhost + 127.0.0.1

You may be tempted to automate this so you don’t have to enter this command every time you start up your virtual machine. However, this is more subtle than you might expect. Since this is the IP address of localhost, placing this command in your .bash_profile file might cause your terminal application to hang when you first start it up because localhost is not yet defined. You can avoid this by adding xhost + to your .bash_profile but be careful with this because it may open you up to security vulnerabilities by allowing clients to connect to your machine from any remote host. Entering the explicit command above or putting it in a bash script that you execute manually every time you log in is somewhat inconvenient but much safer.

When you’re done for the day you can exit and shut down the VM:

exit # to exit Singularity or Charliecloud
exit # to exit Vagrant
vagrant halt # to shut down the virtual machine

Deleting a Vagrant VM

When you shut down a Vagrant virtual machine (VM) with vagrant halt, it’s like shutting down your laptop or workstation. When you restart the VM, you can pick up where you left off. You’ll see all the files and directories that were there before.

This is usually desirable. However, it does mean that the VM is occupying disk space on your machine even when it is suspended. If you have created multiple VMs, this can add up. So, it is often useful to delete a VM if you are done using it.

To check vagrant’s status at any time enter

vagrant global-status

This is a useful command to know about. It will tell you all the VMs vagrant knows about on your computer including the path where the Vagrantfile is located and the state. A vagrant up command will put the VM in a running state while a vagrant halt command will put the VM in a poweroff state.

If you want to delete one or more of these VMs, the first step is to save any files you have on the VM that you want to preserve. This can be done by moving them to the ~/vagrant_data directory which will still exists on your local computer after the VM is deleted.

Now, the best way to proceed is to go to the directory where the vagrant file is and enter:

vagrant destroy # enter y at the prompt
rm -rf .vagrant

The first command deletes all of the disks used by the virtual machine, with the exception of the cross-mounted vagrant_data directory which still exists on your local computer. The second command resets the vagrant configuration. This is particularly important if you re-install a new VM where another VM had been previously. If you skip this step, vagrant up may give you errors that complain about mounting the vagrant_data directory (“…it seems that you don’t have the privileges to change the firewall…”).

This is a start, but you’re not done. As mentioned at the top of this document, Vagrant is really just an interface to VirtualBox, which provides the Linux OS. The Virtualbox VM that contains the Linux OS still exists and is still using resources on your computer. To see the VirtualBoxes that are currently installed though Vagrant, run

vagrant box list

If you used the JEDI Vagrantfile as described in Step B above, then you’ll see one or more entries with the name centos/7. The first step here is to prune any that are not being used any more with

vagrant box prune

However, even this might not delete the VM you want to delete. Run vagrant list to see if it is still there and if it is, you can delete it with

vagrant box remove centos/7

..or ubuntu or singularityware or whatever name is listed for the box you want to delete.

In some cases it might also help to delete the hidden .vagrant file that is created by vagrant in the same directory as your Vagrantfile. So, from that directory, enter:

rm -rf .vagrant

Now, this should be sufficient for most situations. Most users can stop here with confidence that they have deleted their unwanted VMs and have freed up the resources on their local computer.

However, it is possible that there might still be VirtualBox VMs on your machine that Vagrant has lost track of. You might notice this if you try to create a new VM with vagrant up and it complains that “A VirtualBox machine with the name jedibox already exists” (or a similar error message).

If this is the case, you can run VirtualBox directly to manage your VMs. This can be done through the command line with the vboxmanage command (run vboxmanage --help for information) but we recommend the VirtualBox GUI, which is more user-friendly.

To access the GUI on a Mac or Windows machine, just go to your Applications folder and double click on the VirtualBox icon. There you will see a complete list of all the VirtualBox VMs installed on your system and you can delete any that you don’t want by selecting the machine menu item and then remove.